Version 7.2 23 Mediant 1000B Gateway & E-SBC
User's Manual Notices
Note:
• By default, the device supports export-grade (40-bit and 56-bit) encryption due to
US government restrictions on the export of security technologies. To enable 128-
bit and 256-bit encryption on your device, contact your AudioCodes sales
representative.
• This device includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
• This device includes cryptographic software written by Eric Young
(eay@cryptsoft.com).
Note: Some of the features listed in this document are available only if the relevant
License Key has been purchased from AudioCodes and installed on the device. For a
list of License Keys that can be purchased, please consult your AudioCodes sales
representative.
Note: OPEN SOURCE SOFTWARE. Portions of the software may be open source
software and may be governed by and distributed under open source licenses, such
as the terms of the GNU General Public License (GPL), the terms of the Lesser
General Public License (LGPL), BSD and LDAP, which terms are located at:
http://www.audiocodes.com/support and all are incorporated herein by reference. If
any open source software is provided in object code, and its accompanying license
requires that it be provided in source code as well, Buyer may receive such source
code by
contacting AudioCodes, by following the instructions available on
AudioCodes website.
Document Revision Record
LTRT Description
27041 Initial document release for Version 7.2.
27043
 Updated to path version 7.20A.001.
 Updated sections: Computer Requirements (browser support); Accessing the Web
Interface (autocompletion); Areas of the GUI (illustration); Searching for Configuration
Parameters (IP address removed); CLI-Based Management (permissible user levels);
Configuring TLS Certificate Contexts (TLS version); Configuring Physical Ethernet
Ports (show command); Configuring Underlying Ethernet Devices (max. VLANs);
InterfaceTable_InterfaceName; SIP Signaling Messages; First Incoming Packet
Mechanism (by Signaling); Viewing IDS Alarms (show command); Vie
DHCP Clients (show command); Configuring the Device's LDAP Cache; Centralized
Third-Party Routing Server (SIP messages, credentials for authentication); Configuring
the SEM Server (port removed); Configuring Call Setup Rules (dial plan query); Call
Setup Rule Examples; Three-Way Conferencing; Registration Refreshes; Enabling
Interworking of SIP and SIP-I Endpoints (SPIROU, SIP header X-AC-Action);
Configuring BroadSoft's Shared Phone Line Call Appearance for Survivability
(procedure); User Information File; Automatic Provisioning (CLI Script file); Configuring
RTCP XR (media segment, publication IP Group); Enabling Same Call Session ID over
Multiple Devices (removed); FXS Line Testing (removed).
 New sections: Utilizing Gateway Channel Resources for SBC; Using Dial Plan Tags for
IP-to-IP Routing (procedure); Using Dial Plan Tags for Call Setup Rules; Using Dial
To Next Page
Loading...
Need help?
General
