AudioCodes MSBG Series User Manual

User's Manual 682 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
Source IP Group
CLI: src-ip-group-name
[IPInboundManipulation_SrcIp
GroupName]
Defines the IP Group from where the incoming INVITE is
received.
The default is Any (i.e., any IP Group).
Source Username Prefix
CLI: src-user-name-prefix
[IPInboundManipulation_SrcUs
ernamePrefix]
Defines the prefix of the source SIP URI user name (usually in
the From header).
The default is the asterisk (*) symbol (i.e., any source username
prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 923.
Source Host
CLI: src-host
[IPInboundManipulation_SrcHo
st]
Defines the source SIP URI host name - full name (usually in the
From header).
The default is the asterisk (*) symbol (i.e., any host name).
Destination Username Prefix
CLI: dst-user-name-prefix
[IPInboundManipulation_DestU
sernamePrefix]
Defines the prefix of the destination SIP URI user name, typically
located in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination
username prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 923.
Destination Host
CLI: dst-host
[IPInboundManipulation_DestH
ost]
Defines the destination SIP URI host name - full name, typically
located in the Request URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination host
name).
Operation Rule - Action
Manipulated Item
CLI: manipulated-uri
[IPInboundManipulation_Manip
ulatedURI]
Determines whether the source or destination SIP URI user part
is manipulated.
 [0] Source = (Default) Manipulation is done on the source SIP
URI user part.
 [1] Destination = Manipulation is done on the destination SIP
URI user part.
Remove From Left
CLI: remove-from-left
[IPInboundManipulation_Remo
veFromLeft]
Defines the number of digits to remove from the left of the user
name prefix. For example, if you enter 3 and the user name is
"john", the new user name is "n".
Remove From Right
CLI: remove-from-right
[IPInboundManipulation_Remo
veFromRight]
Defines the number of digits to remove from the right of the user
name prefix. For example, if you enter 3 and the user name is
"john", the new user name is "j".
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
applied first.
Leave From Right
CLI: leave-from-right
[IPInboundManipulation_Leave
FromRight]
Defines the number of characters that you want retained from the
right of the user name.
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
applied first.

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English