User's Manual 804 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Tab Field Description

Note: The parameter is applicable only to analog
interfaces.
RTP/RTCP Channel Identifier Channel identifier number.
RTP Direction Direction of RTP:
 "Tx & Rx": both directions (transmit and
receive)
Local UDP Port Local UDP port on the device.
Remote IP Addr IP address of the remote IP side.
Remote UDP Port Port of the remote IP side.
Rx Octet Count Total number of received packets.
Tx Octet Count Total number of transmitted packets.
Network Jitter Network jitter (in msec).
Roundtrip Delay Round-trip delay time (in msec).
Packet Loss Packet loss (in %).
Remote RTCP CName
Voice
Settings
Channel Identifier Channel ID.
Coder See ''Configuring Coder Groups'' on page 385.
Frame Duration Frame duration (in msec).
Echo Canceller See ''Configuring Echo Cancellation'' on page
178.
Silence Suppression See ''Configuring Silence Suppression'' on page
177.
Input Gain See ''Configuring Voice Gain (Volume) Control''
on page 177.
Voice Volume See ''Configuring Voice Gain (Volume) Control''
on page 177.
DTMF Transport Type See ''Configuring DTMF Transport Types'' on
page 191.
Enabled Detectors Detectors (e.g., AMD).
Fax Transport Type See ''Fax and Modem Capabilities'' on page 178.
To Next Page
Loading...
Need help?
General
