User's Manual 854 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
CDR Field Description
(CDR Report
Type)
RtpIp
RTP IP address "CALL_END"
Port
Remote RTP port "CALL_END"
TrmSd
Initiator of call release (IP, Tel, or Unknown) "CALL_END"
TrmReason
SIP call termination reason (see ''Release Reasons in CDR
for Gateway Application'' on page 857)
"CALL_END"
Fax
Fax transaction during call "CALL_END"
InPackets
Number of incoming packets "CALL_END"
OutPackets
Number of outgoing packets "CALL_END"
PackLoss
Local packet loss "CALL_END"
RemotePackLoss
Number of outgoing lost packets "CALL_END"
SIPCalld
Unique SIP call ID All
SetupTime
Call setup time "CALL_START"
ConnectTime
Call connect time "CALL_CONNE
CT" and
"CALL_END"
ReleaseTime
Call release time "CALL_END"
RTPdelay
RTP delay "CALL_END"
RTPjitter
RTP jitter "CALL_END"
RTPssrc
Local RTP SSRC "CALL_END"
RemoteRTPssrc
Remote RTP SSRC "CALL_END"
RedirectReason
Redirect reason "CALL_END"
TON
Redirection phone number type "CALL_END"
NPI
Redirection phone number plan "CALL_END"
RedirectPhonNum
Redirection phone number "CALL_END"
MeteringPulses
Number of generated metering pulses "CALL_END"
SrcHost
Source host name All
SrcHostBeforeMap
Source host name before manipulation All
DstHost
Destination host name All
DstHostBeforeMap
Destination host name before manipulation All
IPG
IP Group name All
LocalRtpIp
Remote RTP IP address "CALL_END"
LocalRtpPort
Local RTP port "CALL_END"
Amount
0-999999
Data is stored per call and sent in the syslog as follows:
ï‚§
currency-type: amount multiplier for currency charge
"CALL_END"