AudioCodes MSBG Series User Manual

User's Manual 868 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
or double). For example, if you want the CDR field name to appear
as 'Phone Duration', you must configure the parameter to 'Phone
Duration'. You can also configure the CDR field name with an
equals (=) sign, for example "call-connect-time=".
Note:
 For VSA's that do not require a prefix name, leave the parameter
undefined.
 The parameter's value is case-sensitive. For example, if you
want the CDR field name to be Phone-Duration, you must
configure the parameter to "Phone-
Duration" (i.e., upper case "P"
and "D").
RADIUS Attribute Type
radius-type
[SBCCDRFormat_RadiusType]
Defines whether the RADIUS Attribute of the CDR field is a standard
or vendor-specific attribute.
 [0] Standard = (Default) For standard RADIUS Attributes.
 [1] Vendor Specific = For vendor-specific RADIUS Attributes
(VSA).
Note: The parameter is applicable only for RADIUS accounting (i.e.,
'CDR Type' parameter configured to RADIUS SBC).
RADIUS Attribute ID
radius-id
[SBCCDRFormat_RadiusID]
Defines an ID for the RADIUS Attribute. For VSAs, this represents
the VSA ID; for standard Attributes, this represents the Attribute ID
(first byte of the Attribute).
The valid value is 0 to 255 (one byte). The default is 0.
Note:
 The parameter is applicable only for RADIUS accounting (i.e.,
'CDR Type' parameter configured to RADIUS SBC).
 For VSA's (i.e., 'RADIUS Attribute Type' parameter configured to
Vendor Specific), the parameter must be configured to any
value other than 0.
 For standard RADIUS Attributes (i.e., 'RADIUS Attribute Type'
parameter configured to Standard), the value must be a
"known" RADIUS ID (per RFC for RADIUS). However, if you
configure the ID to 0 (default) for any of the RADIUS Attributes
(configured in the 'Column Type' parameter) listed below and
then apply your rule (Click Apply), the device automatically
replaces the value with the RADIUS Attribute's ID according to
the RFC:

Destination Username: 30

Source Username: 31

Accounting Status Type: 40

Local Input Octets: 42

Local Output Octets: 43

Call Duration: 46

Local Input Packets: 47

Local Output Packets: 48
If you configure the value to 0 and the RADIUS Attribute is not
any of the ones listed above, the configuration is invalid.

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English