Version 7.2 877 Mediant 1000B Gateway & E-SBC
User's Manual 54. Reporting Information to External Party
ID
Attribute
Name
Vendor-
Specific
Attribute
(VSA) ID
Description
Value
Format
Example AAA
44 acct-session-id
(Standard)
A unique
accounting
identifier - match
start & stop
String 34832 Start
Acc
Stop
Acc
46 acct-session-
time
(Standard)
For how many
seconds the user
received the
service
Numeric
- Stop
Acc
47 acct-input-
packets
(Standard)
Number of packets
received during the
call
Numeric
- Stop
Acc
48 acct-oputput-
packets
(Standard)
Number of packets
sent during the call
Numeric
- Stop
Acc
61 nas-port-type (Standard)
Physical port type
of device on which
the call is active
String 0: Asynchronous Start
Acc
Stop
Acc
Response Attributes
26 h323-return-
code
103 The reason for
failing
authentication (0 =
ok, other number
failed)
Numeric
0 Request accepted
Stop
Acc
44 acct-session-id
(Standard)
A unique
accounting
identifier – match
start & stop
String - Stop
Acc
Below is an example of RADIUS Accounting, where non-standard parameters are
preceded with brackets:
Accounting-Request (361)
user-name = 111
acct-session-id = 1
nas-ip-address = 212.179.22.213
nas-port-type = 0
acct-status-type = 2
acct-input-octets = 4841
acct-output-octets = 8800
acct-session-time = 1
acct-input-packets = 122
acct-output-packets = 220
called-station-id = 201
calling-station-id = 202
// Accounting non-standard parameters:
(4923 33) h323-gw-id =
(4923 23) h323-remote-address = 212.179.22.214
(4923 1) h323-ivr-out = h323-incoming-conf-id:02102944 600a1899