AudioCodes MSBG Series User Manual

Version 7.2 949 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
[DHCP120OptionMode] Enables the acceptance of DHCP Option 120 in DHCP responses sent
by a DHCP server.
 [0] = DHCP Option 120 is not supported and ignored if received in the
DHCP response.
 [1] = (Default) DHCP Option 120 is supported and if received, the
device adds the SIP server information to the Proxy Set.
[DHCPSpeedFactor] Defines the device's DHCP renewal speed for a leased IP address from
a DHCP server.
 [0] = Disable
 [1] = (Default) Normal
 [2] to [10] = Fast
When set to 0, the DHCP lease renewal is disabled. Otherwise, the
renewal time is divided by this factor. Some DHCP-enabled routers
perform better when set to 4.
Note: For the parameter to take effect, a device reset is required.
DHCP Servers Table
DHCP Servers Table
configure network > dhcp
server <index>
[DhcpServer]
Defines the device's embedded DHCP server.
The format of the ini file table parameter is as follows:
[ DhcpServer ]
FORMAT DhcpServer_Index = DhcpServer_InterfaceName,
DhcpServer_StartIPAddress, DhcpServer_EndIPAddress,
DhcpServer_SubnetMask, DhcpServer_LeaseTime,
DhcpServer_DNSServer1, DhcpServer_DNSServer2,
DhcpServer_NetbiosNameServer, DhcpServer_NetbiosNodeType,
DhcpServer_NTPServer1, DhcpServer_NTPServer2,
DhcpServer_TimeOffset, DhcpServer_TftpServer,
DhcpServer_BootFileName, DhcpServer_ExpandBootfileName,
DhcpServer_OverrideRouter, DhcpServer_SipServer,
DhcpServer_SipServerType;
[ \DhcpServer ]
For a detailed description of the table, see Configuring the Device's
DHCP Server.
DHCP Vendor Class Table
DHCP Vendor Class table
configure network > dhcp-
server vendor-class
[DhcpVendorClass]
Defines Vendor Class Identifier (VCI) names (DHCP Option 60) for the
device's DHCP server. Only if the DHCPDiscover request message,
received from the DHCP client, contains this value does the device
provide DHCP services.
The format of the ini file table parameter is as follows:
[ DhcpVendorClass ]
FORMAT DhcpVendorClass_Index =
DhcpVendorClass_DhcpServerIndex,
DhcpVendorClass_VendorClassId;
[ \DhcpVendorClass ]
For a detailed description of the table, see Configuring the Vendor Class
Identifier on page 216.
DHCP Option Table
DHCP Option table
configure network > dhcp-
Defines additional DHCP Options that the device's DHCP server can use
to service its DHCP clients.

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English