AudioCodes MSBG Series User Manual

Version 7.2 951 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
Identifier
auth-key-id
[NtpAuthKeyId]
server. The NTP server may have several keys configured for different
clients; this number identifies which key is used.
The valid value is 1 to 65535. The default is 0 (i.e., no authentication is
done).
NTP Authentication Secret
Key
auth-key-md5
[ntpAuthMd5Key]
Defines the secret authentication key shared between the device
(client) and the NTP server, for authenticating NTP messages.
The valid value is a string of up to 32 characters. By default, no key is
defined.
Regional Clock and Daylight Saving Time Parameters
UTC Offset
configure system > clock >
utc-offset
[NTPServerUTCOffset]
Defines the Universal Time Coordinate (UTC) offset (in seconds) from
the local time.
The valid range is -43200 to 43200. The default is 0.
Note: The offset setting is applied only on the hour. For example, if
you configure the parameter at 15:42, the device applies the setting
only at 16:00.
Daylight Saving Time
configure system > clock >
summer-time > summer-time
[DayLightSavingTimeEnable]
Enables daylight saving time (DST).
 [0] Disable (default)
 [1] Enable
Start Time / Day of Month
Start
configure system > clock >
summer-time > start
[DayLightSavingTimeStart]
Defines the date and time when DST begins. This value can be
configured using any of the following formats:
 Day of year - mm:dd:hh:mm, where:

mm denotes month

dd denotes date of the month

hh denotes hour

mm denotes minutes
For example, "05:01:08:00" denotes daylight saving starting from
May 1 at 8 A.M.
 Day of month - mm:day/wk:hh:mm, where:

mm denotes month (e.g., 04)

day denotes day of week (e.g., FRI)

wk denotes week of the month (e.g., 03)

hh denotes hour (e.g., 23)

mm denotes minutes (e.g., 10)
For example, "04:FRI/03:23:00" denotes Friday, the third week of
April, at 11 P.M. The week field can be 1-5, where 5 denotes the
last occurrence of the specified day in the specified month. For
example, "04:FRI/05:23:00" denotes the last Friday of April, at 11
P.M.
End Time / Day of Month
End
configure system > clock >
summer-time > end
[DayLightSavingTimeEnd]
Defines the date and time when DST ends. For a description of the
format of this value, see the DayLightSavingTimeStart parameter.
Offset
configure system > clock >
summer-time > offset
Defines the DST offset (in minutes).
The valid range is 0 to 120. The default is 60.
Note: The offset setting is applied only on the hour. For example, if

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English