AUMA AM 02.1 User Manual

Table 4:
Weights for output drive type A 25.2 – A 40.2
[kg]Flange sizeType designation
41F 25.2A 25.2
68F 30.2A 30.2
129F 35.2A 35.2
207F 40.2A 40.2
Table 5:
Weights for output drive type AF 25.2 – AF 40.2
[kg]Flange sizeType designation
61F 25.2AF 25.2
103F 30.2AF 30.2
180F 35.2AF 35.2
320F 40.2AF 40.2
3.2. Storage
Danger of corrosion due to inappropriate storage!
→
Store in a well-ventilated, dry room.
→
Protect against floor dampness by storage on a shelf or on a wooden pallet.
→
Cover to protect against dust and dirt.
→
Apply suitable corrosion protection agent to uncoated surfaces.
Damage due to excessively low storage temperatures!
→
AUMA MATIC actuator controls may NOT be stored below –40 °C
Long-term storage
For long-term storage (more than 6 months), observe the following points:
1. Prior to storage:
Protect uncoated surfaces, in particular the output drive parts and mounting
surface, with long-term corrosion protection agent.
2. At an interval of approx. 6 months:
Check for corrosion. If first signs of corrosion show, apply new corrosion protec-
tion.
3.3. Packaging
Our products are protected by special packaging for transport when leaving the
factory.The packaging consists of environmentally friendly materials which can easily
be separated and recycled.We use the following packaging materials: wood,
cardboard, paper, and PE foil. For the disposal of the packaging material, we
recommend recycling and collection centres.
13
SA 25.1 – SA 48.1 / SAR 25.1 – SAR 30.1
AM 02.1 Transport, storage and packaging

AUMA AM 02.1 Specifications

General

Brand	AUMA
Model	AM 02.1
Category	Controller
Language	English