5.4. Electrical connection of actuator
Figure 26: Connection arrangement for sizes 25.1 – 40.1
[1] Motor connection compartment for nominal currents exceeding 30 A
[2] Cable entry for motor connection
[3] Electrical connection (S) for control connections as well as for motor connec-
tions up to 30 A (only available for actuator controls on wall bracket).
Figure 27: Connection arrangement for size 48.1
[1] Motor connection compartment
[2] Cable entry for motor connection
[3] Electrical connection (S) for control connections (only available for actuator
controls on wall bracket)
Information
Motor connection is performed within motor connection compartment [1] for motors
with nominal currents exceeding 30 A. Motor connection can also be made via the
pins for motors at the electrical connection [3] in case of lower nominal currents.
28
SA 25.1 – SA 48.1 / SAR 25.1 – SAR 30.1
Electrical connection AM 02.1
To Next Page
Loading...
