AUMA AM 02.1 - Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Retain operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Basic information on safety
51.2. Range of application
61.3. Warnings and notes
61.4. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
112.2. Short description
123. Transport, storage and packaging........................................................................................
123.1. Transport
133.2. Storage
133.3. Packaging
144. Assembly................................................................................................................................
144.1. Mounting position
144.2. Handwheel fitting
154.3. Multi-turn actuator: mount to valve/gearbox
154.3.1. Output drive type A
164.3.1.1. Stem nut: finish machining
174.3.1.2. Multi-turn actuator (with output drive type A): mount to valve
184.3.2. Output drive types B and E
184.3.2.1. Multi-turn actuator with output drive types B: mount to valve/gearbox
194.4. Accessories for assembly
194.4.1. Stem protection tube for rising valve stem
215. Electrical connection.............................................................................................................
215.1. Basic information
235.2. Connection with control box
245.3. Electrical connection of actuator controls
245.3.1. Electrical connection S/SH (AUMA plug/socket connector)
255.3.1.1. Terminal compartment : open
265.3.1.2. Cable connection
275.3.1.3. Terminal compartment : close
285.4. Electrical connection of actuator
2
SA 25.1 – SA 48.1 / SAR 25.1 – SAR 30.1
Table of contents AM 02.1