Check Settings under the System Setup Screens
Use the C-more Micro-Graphic panel’s System Setup Screens to check the various settings such
as the beep and orientation. See Chapter 5: System Setup Screens for additional details.
Beep - Used to enable or disable the internal audible beeper. the default is beep on.
Calibration - Used to calibrate the touch screen on the panel.
Cleaning the Display Screen
The display screen should be cleaned periodically by wiping it with a lint free damp cloth using
a mild soap solution. Dry the surface when finished with a lint free cloth. Do not use cleaning
solvents (ammonia, alcohol, acetone, etc.) which may damage the plastic housing and touch
screen.
The longevity of the touch screen can be increased by the use of the EA-4-COV2 or EA-6-
COV2 clear screen overlay. See Chapter 3: Accessories for additional information on the screen
overlay.
To prevent damage to the touch screen, avoid touching the screen with sharp objects, striking
the screen with a hard object, using abrasives on the screen, or using excessive force when
pressing the touch screen.
7–5
Chapter 7: Maintenance
7
EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10
To Next Page
Loading...
Need help?
General