Automation Direct C-more EA1-T4CL - Exit

Exit
With Exit highlighted, press ENT [F5] to bring up the screen
shown to the left. You will be given the choice to either proceed
with exiting the System Setup Screens by pressing [F5] for YES
or allowed to cancel by pressing [F1] for NO. You will be
returned to the project screen if answering YES.
If there is no user program loaded into the panel, then a NO
USER PROGRAM message as shown to the left will be displayed.
5–17
Chapter 5: System Setup Screens
5
EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10
®
BAK
UP
DWN
ENT
ENT
1
2
3
4
SETUP MENU
Do you want to
exit from System
Screen?
No[F1] / Yes[F5]
BAK
UP
DWN
ENT
ENT
1
2
SETUP MENU
Do you want to
exit from System
No[F1] / Yes[F5]
NO USER PROGRAM