5–7
Chapter 5: System Setup Screens
5
EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10
Setting Menu
Use the UP [F3] and DWN [F4] function keys to scroll
through the list of settings. The BAK [F1] function key will
return you to the previous screen. Use the ENT [F5]
function key to make your selection once you have the
setting highlighted.
The Setting screen includes the following:
Brightness - page 5-7
Touch/Key Beep – page 5-8
Calibration – page 5-9
Clear User Memory – page 5-10
Reset to Factory Default – page 5-10
Hourglass – page 5-11
Rotation – page 5-12
Setting – Brightness
With Brightness
highlighted, press
ENT [F5] to bring
up the screen
showing the current
value. The default is
10. The contrast can
be adjusted between
1 and 16, with 1
being the least
contrast and 16
being the greatest.
NOTE: When the panel is powered through Port1 from a connected PC, the screen brightness is diminished
because the panel is running in Low-Power Mode. Connect an external 12-24 VDC power source when the
panel is installed in its application for full brightness.
To Next Page
Loading...