Automation Direct C-more EA1-T4CL User Manual

3–11
Chapter 3: Accessories
3
EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10
®
21-Button Vertical (Portrait) Keypad Bezel for 6-inch Panels
(cont’d)
3. Use (8) Bezel Mounting Clips,
EA MG BZ2 BRK, to secure keypad
bezel through enclosure cutout.
Tighten screws to a torque of
C-more 6-Inch
Micro-Graphic
Panel
21 Button
Keypad Bezel
EA MG6 BZ2
1. Remove
Expansion
Connector
Protective
Cover from
rear of
panel.
2. Use the (4) Panel Mounting
Clips, EA MG BZ2 BRK,
that are supplied with the
panel, to secure panel to
keypad bezel and compress
the gasket between the
panel and the keypad bezel.
Tighten screws to a torque
of 21 28 oz in [0.15 0.2 Nm].
Function
Key Label
Insert
4. Peel Protective Film
from front of panel.
Panel and 21-Button Keypad Bezel Assembly
NOTE: Mounting clips for the panel and keypad bezels are included with the respective product.

Automation Direct C-more EA1-T4CL Specifications

General

Brand	Automation Direct
Model	C-more EA1-T4CL
Category	Control Panel
Language	English