6–13
Chapter 6: PLC Communications
6
EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10
GE, Mitsubishi, Omron, Modicon and Siemens PLCs
Panel Powered via external power supply, Port2 Communications
Compatibility & Connection Chart
Controller
C-more
Micro-Graphic Panel
Family CPU PLC Port & Type
Panel to PLC Cabling Components Required for
Specific Port and Protocol being used.
External DC Power Supply
Powered from an external 24 VDC source.
Using panel’s Port2
DB 15-pin - female
Protocol(s)
Supported
Components &
Network Type
GE
90/30, 90/70
15-pin
D-sub port
SNPX
EA-90-30-CBL
RS-422
Micro 90,
VersaMax
Micro
RJ45
Port 1
* See Diagram
13
RS-232
15-pin
D-sub port
Port 2
EA-90-30-CBL
RS-422
Mitsubishi
Melsec
FX Series
25-pin
D-sub port
CPU Direct
EA-MITSU-CBL
RS-422
8-pin
mini-din port
EA-MITSU-CBL-1
RS-422
Q / QnA
9-pin
D-sub port
Q / QnA
* See Diagram
15
RS-232C
6-pin
mini-din port
* See Diagram
16
RS-232C
Omron
C200 (Adapter),
C500
25-pin
D-sub port
Host Link
EA-OMRON-CBL
RS-232
CJ1, CS1,
CQM1,
CPM1,
CPM2
C200 CPU
9-pin
D-sub port
Host Link
FINS
* See Diagram
8 & 9
RS-232
Modicon
984 CPU,
Quantum
113 CPU,
AEG
Modicon
Micro Series
110 CPU
varies Modbus RTU
* See Diagram
10, 11 & 12
RS-232
Siemens
S7-200
CPU
9-pin
D-sub port
0 or 1
PPI
* See Diagram
14
RS-485
* Note: Wiring Diagrams for user constructed cables start on page 6-24.
To Next Page
Loading...