BS100 DYFI Operators handbook
P-BS100/FE - Rev.F / Doc/ 980114 52 Autronica Fire and Security AS
C.2.3 More alarms
When operating the "MORE ALARMS" on the individual BS-100 control
panels, it is only possible to scroll alarms registered in that particular BS-
100 control panel which has been operated.
When operating the "MORE ALARMS" on BU-units, it is possible to scroll
alarms registered in the entire system.
C.3 Disable / Restore
Disablements on a BS-100 control panel will activate "FUNCTION
DISABLED" only on this control panel and on the BU-units.
Disablements will be stored in "STORED-EVENTS" and only showed in
the menu "SHOW-STATUS DISABLEMENTS" on the control panel where
the disablement was carried out.
Disablements / restorations of address, zone, controls, sounders and Fire
brigade can only be carried out on the individual BS-100 control panel.
C.4 System
C.4.1 Sensitivity
Sensitivity control must be carried out at each individual BS-100 control
panel.
C.4.2 Internal
The real-time clock in BS-100 control panels has to be set manually via
menu.
The EA- clock will be set equal to the clock in control panel with address A.
To Next Page
Loading...
