BS100 DYFI Operators handbook
P-BS100/FE - Rev.F / Doc/ 980114 51 Autronica Fire and Security AS
C.1.6 Function disabled
The "FUNCTION DISABLED" indication lamp will only light on the
control panel which is partly disabled. If this lamp is illuminated on one of
the BS-100 control panels, it will also light on the BU-units.
C.1.7 Indication lamps H1, H2, H3
The indication lamps H1, H2 and H3 on the BS-100 control panel are
controlled separately.
The indication lamps H1, H2 and H3 on the BU-units are controlled from
the control outputs on the EA 2/3 (input L51, 52, 53).
C.2 Operation
C.2.1 SOUNDER SILENCE
C.2.1.1 From fire alarm control panel
When "SOUNDER SILENCE" button on the BS-100 control panel which
has registered the alarm is operated, all alarm devices connected to this
control panel and the internal buzzer on the BU- units are switched off.
If another BS-100 control panel also is in alarm condition, "SOUNDER
SILENCE" also must be operated at that control unit.
C.2.1.2 From EA- or BU-100
If the "SOUNDER SILENCE" is operated from the EA 1/2/3 (separate
input) or the BU-100, all alarm devices and internal buzzers on all BS-100
control panels will be silenced.
C.2.2 Reset
C.2.2.1 From fire alarm control panel
When operating the "RESET" on a control panel in abnormal condition (all
other control panels are in normal condition), this will reset the entire
system.
If another BS-100 control panel is in abnormal condition, operating of the
"RESET" will only reset the control panel which is operated.
To reset the entire system (BS-100 and BU-units) operate the last control
panel in abnormal condition.
C.2.2.2 From EA- or BU-100
Operating of the "RESET" from EA 1/2/3 or BU-100 will reset the entire
system.
To Next Page
Loading...
