EasyManua.ls Logo

Avaya 9600 Series - Chapter 17: Using the Call Log; Missed Calls

Avaya 9600 Series
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter name Default value Description and value range
Software Package that should be downloaded and
installed by the deskphone during power-up or reset if it
has not already been downloaded and installed. This
parameter should only be set in an upgrade file.
RINGBKFEATURES “ ” (Null) A list of feature number identifiers for softkey features
potentially available in the active with far end ringback
call state.
Zero to 255 ASCII characters consisting of zero to three
whole numbers separated by commas without any
intervening spaces.
RINGTONESTYLE 0 The Ring Tone Style Menu initially offered to the user ,
0=Classic; 1=Alternate, more modern ringtones.
RTCPMON “ ” (Null) Text string containing the 4-octet IP address of the RTCP
monitor currently in use, in dotted decimal or DNS Name
format (0-15 ASCII characters, no spaces).
SCEPPASSWORD “$SERIALNO” Specifies a challenge password for SCEP. Zero to 50
ASCII characters.
SCREENSAVER “ ” (Null) Filename for a custom screen saver. 0 to 32 ASCII
characters. Note that screen saver files must be in .jpg
format. Acceptable characters for use in filenames are: 0
through 9
A through Z a through z - (dash) . (period)
_ (underscore)
SCREENSAVERON 240 Number of idle time minutes after which the screen saver
is turned on. The default is 240 minutes (4 hours). Valid
values range from zero (disabled) to 999 minutes (16.65
hours). For 9670G phones, use HOMEIDLETIME instead.
SERVER_CERT_RECHECK
_HOURS
24 Applicable for H.323 over TLS signaling only. Specifies
the number of hours to verify the revocation status of the
certificates that were used to establish a TLS connection.
Valid values are 0 to 32767. The value 0 stops the
verification.
SLMCAP 0 Specifies whether the SLA Monitor agent supports packet
capture.
Assign one of the following values.
0: Packet capture is disabled.
1: Packet capture is enabled but without payloads.
2: Packet capture is enabled with payloads.
3: Packet capture is disabled. The feature is enabled
from the CRAFT menu with payloads.
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 96
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya 9600 Series

Related product manuals