Procedure
1. Press Home.
2. Tap Settings > Options & Settings > Call Settings > Redial.
3. Tap to select one of the following options:
• One Number: To dial the last dialed number.
• List: To display the last six dialed numbers.
4. Tap Save.
Configuring visual alerts
About this task
Use this task to cause the LED in the top right corner of the phone to flash when the deskphone
gets incoming calls.
Procedure
1. Press
Home.
2. Tap Settings > Options & Settings > Call Settings > Visual Alerting.
3. Tap to select On or Off.
4. Tap Save.
Setting the audio path
You can set your phone to go off-hook on the Speaker or the Headset when you make an on-hook
call.
Procedure
1.
Press
Home.
2. Tap to select Settings > Options & Setting > Call Settings > Audio Path.
3. Tap to select Headset or Speaker.
4. Tap Save.
The Home Screen
24
Using Avaya 9621G/9641G IP Deskphones SIP January 2015
Comments? infodev@avaya.com