Activating EC500 for simultaneous ringing on multiple
phones
About this task
Using the EC500 feature, you can program your deskphone in such a way that the deskphone and
your cell phone rings simultaneously when there is an incoming call. With this feature, you can
answer office calls while you are away from your desk. The system administrator has to add your
cell phone number and program the desk phone.
Procedure
1. From the Phone screen, gain access to the Features
screen.
2. Scroll to EC500, press OK and tap the corresponding line.
When you enable the EC500 feature, the deskphone displays the
icon in the top line.
Extending a call to your cell phone (EC500)
About this task
You can use the Extend Call feature to receive a call that is active on your office deskphone on your
mobile phone. The Extend Call feature uses EC500 Extension to Cellular. You to transfer an office
call to your mobile phone and move away from your desk. This feature is programmed by your
system administrator.
Note:
Only your administrator can set the destination mobile number.
Procedure
1. During an active call, gain access to the
Features screen.
2. Scroll to Extend Call, and tap to forward the call to your mobile phone.
About Features
86 Using Avaya 9621G/9641G IP Deskphones SIP January 2015
Comments? infodev@avaya.com
To Next Page
Loading...
