Setting dialing options
About this task
Your phone has the following two dialing options:
• You can dial a number by picking up the handset, getting a dial tone, and dialing the required
number (off-hook dialing).
•
You can use the edit dialing feature. If you set this feature, you can enter all or part of the
number, use backspace to correct a digit if needed, and when ready, initiate the dialing process
using a softkey. Edit dialing may not be available to you, depending on how your system is
administered.
If you activated the Limit Number of Concurrent Calls (LNCC) feature in the edit dialing mode, and
you start dialing a number when at the same time your deskphone receives a call, the deskphone
logs this call as a missed call.
Procedure
1. Press Avaya Home.
2. Tap Settings > Options & Settings > Call Settings > Dialing options.
3. Tap to select On-hook or Editable.
When on-hook dialing is in effect, dialpad (edit dial) searches are not available.
4. Tap Save.
Toggling caller name and number
About this task
Use this procedure to display either caller name or caller number if the caller name is too long to fit
on the deskphone screen.
Procedure
1. Press
Home.
2. Tap Settings > Options & Settings > Call Settings > Toggle Caller Name and Number.
3. Tap to select Yes or No.
4. Tap Save.
Setting up speed dialing
About this task
Use this task to assign speed dial numbers to your contacts. You can assign speed dial numbers to
up to 10 contacts.
Settings
January 2015 Using Avaya 9621G/9641G IP Deskphones SIP 25
Comments? infodev@avaya.com
To Next Page
Loading...
