2. From the Phone screen, tap Conference.
3. Dial the telephone number, or call the person from the contacts list, or call the person from
the History list.
4. When the person answers, tap Join to add the person to the existing call.
5. To add another party to the conference call, tap Add.
6. Repeat Steps 3 and 4 to add another person to the conference call.
Adding a person on hold to a conference call
Procedure
1. From the Phone screen, select your active call.
2.
Tap Conf or Add if you are already in a conference.
3. Select the call on hold that you want to add to the conference.
4. Tap Resume to take the call off hold.
5. Tap Join or Conf to add the person to the conference call.
Putting a conference call on hold
About this task
When you put a conference call on hold, the other parties can still talk to each other.
Procedure
Tap Hold during a conference call.
Dropping the last participant from a conference call
About this task
Use the following procedure to drop the last participant added to the conference call. Once you drop
the last added participant, you cannot use the procedure to drop other participants. The deskphone
plays an error tone if you try to use the drop method again. If you add another participant after
dropping the last added participant, you can use the drop method again to drop this participant.
Note:
This feature is applicable only for a conference call of the AST 1 type.
Procedure
1. From the Phone screen, select your active conference call.
2. Tap Drop.
Standard call related features
50 Using Avaya 9621G/9641G IP Deskphones SIP January 2015
Comments? infodev@avaya.com
To Next Page
Loading...
