Avaya 9621G - Activating Mute Alerting; Setting the Phone Screen Width

Procedure
1. Press Home.
2. Tap Settings > Options & Settings > Call Settings > Headset Signaling.
3. Tap to select any of the following options:
• Disabled: Disables the deskphone to headset setting.
• Switchhook and Alert: Activates the headset if you press Headset. When the deskphone
receives an incoming call, you hear the alert tone in the headset.
• Switchhook only: Activates the headset if you press Headset. When the deskphone
receives an incoming call, you do not hear the alert tone in the headset.
Activating mute alerting
You can configure your deskphone to alert you if your deskphone is on mute. The alert can be an
audible beep and a visible indication on the top line of your deskphone.
Procedure
1.
Press
Home.
2. Tap Settings > Options & Settings > Call Settings > Mute Alerting.
3. Tap to select from one of the following options:
• Audible
• Visual
• Both
4. Tap Save.
Setting the phone screen width
Procedure
1. Press
Home.
2. Tap to select Settings > Option & Settings > Screen & Sound Options > Phone Screen
Width.
3. Tap to select to select one of the following options:
• Full: Each call appearance or feature occupies the entire width of a line.
• Half: Each call appearance or feature occupies half the width of a line, effectively splitting
the screen in half or half to full. If your screen width is set to half and you set the
deskphone to display large text, the screen width will automatically change from half to full
to allow the larger text size to display properly. In this case, if you prefer a split screen,
you must turn off large text.
The Home Screen
32
Using Avaya 9621G/9641G IP Deskphones SIP January 2015
Comments? infodev@avaya.com