Important:
System Platform creates an internal, private bridge that allows virtual machines
to communicate with each other. This private bridge does not have any
connection to your LAN. During installation, System Platform runs an algorithm
to find a set of IP addresses that do not conflict with the addresses configured on
the System Domain Network Configuration screen. However, it is still possible
that the addresses selected conflict with other addresses in your network. Since
this private bridge is not connected to your LAN, this address conflict could result
in the failure of System Platform or an installed template to route packets
correctly.
Before installing a template, check the Network Configuration page on the
System Platform Management console (Server Management > Network
Configuration) to view the addresses allocated on the bridge named “avprivate”.
Keep in mind that the template you install may take additional addresses on the
private bridge. The range of addresses start with System Domain's (Dom-0)
interface on “avprivate”.
3. Select a location from the list in the Install Templates From box. See
Search Local
and Remote Template field descriptions on page 77 for more information on the
available location options.
(Optional) If the template installation files are located in a different server (for
example, Avaya PLDS or HTTP), you may be required to configure a proxy
depending on your network.
4. Click Search to display a list of template descriptor files (each available template
has exactly one template descriptor file).
5. On the Select Template page, click the required template, and then click Select to
continue.
The system displays the Template Details page with information on the selected
template and its Virtual Appliances.
6. Click Install to start the template installation.
Installing a solution template
76 Installing and Configuring Avaya Aura
™
System Platform April 2010
To Next Page
Loading...
Need help?
General
