Beta Build Limitation
Some issues are present in this beta build and will be solved in next builds.
• Upgrading from 11.3 on a device with Google Play Store already installed to this beta
version 11.4.0.21 will require approval of additional permissions, via a message visible on
the CU360 screen. Permissions can be granted only via remote control/keyboard/touch
screen. Do not upgrade remotely.
• Cannot support auto-framing when an additional monitor is connected.
USB Audio/Video Bar Mode Enhancements
When USB Audio/Video Bar Mode is active, you can use an Avaya CU360 device as your laptop’s
external USB camera, microphone, and speaker.
With USB Bar Mode, users can run their preferred unified communication/video conferencing
application on their computer and use the device’s embedded camera and audio in/out for their
meetings.
You can activate USB Bar Mode “on the fly” (manually via the remote control or the web interface),
once your computer is connected, or you can also setup the CU360 to be always in USB Bar
Mode.
In this case, you just connect your computer and start using the CU360 audio/video peripherals,.
Important
• The CU360 supports 1080p30 video resolution when used as a USB camera.
Connect a Computer to CU360 for USB Bar Mode
Your computer needs to be connected to the CU360 device through a USB 3.0 cable (connected
to CU360 type-C port) to use the CU360 in USB Bar mode.
On the computer side, you can connect the cable to a type-A USB 3.0 or type-C port.
The computer acts as USB Host and the CU360 acts as gadget/device, allowing the computer to
see the CU360’s peripherals as its own USB resources (camera, audio mic and speaker).
Figure 17: How to connect CU360 to the Computer for USB A/V Bar Mode
Important
• To be supported, your laptop must have one of the following operating systems:
Windows 10 version 1803 or later. Apple macOS is supported in this build only
connected via Type A cable.
• If your laptop is not detected, assure that you are using a USB 3.0 cable
connected to CU360’s type-C port.If you need a cable longer than 2.7 m (8.8
ft), use an active USB booster extension cable. Don’t use a cable suitable only for
charging devices.It is strongly suggested to not plug an USB extra camera or other
USB peripherals into the CU360 if you plan to use the CU360 itself as USB Camera.
• If you want to extend the computer configuration to include an external monitor
with this setup, connect your computer to the monitor in your usual way.
To Next Page
Loading...
