The CU360 Video-collaboration Application
The CU360 Video-collaboration Application allows placing or receiving H323 and SIP calls, as
standalone endpoint or configured in complex Avaya Meetings/Workspace Solution deployment or
in third-party networks.
When first installing the product, you can perform the quick setup procedure from the GUI or the
web interface of the endpoint.
In the quick setup, you can choose the name of your endpoint, select the language and the
country and optionally provide network configuration data for your ethernet connection, if you need
a static address assigned to your endpoint, or configure Wi-Fi.
Once the CU360 App is configured and running, you can activate the standard system navigation
bar by moving the mouse pointer at the bottom of the screen.
See System OS Management
Once the CU360 Video-collaboration Application is configured and running, you can activate the
standard Operating System Navigation bar by moving the mouse pointer at the bottom of the
screen.
Note:
• The mouse pointer can be activated by pressing the “Mouse” button on the
remote-control.
OS Navigation Bar
Figure 55: Standard System Navigation Bar – A10
Back (Triangle): Takes you back a level in an app, or back a page in a browser, etc. Right
clicking with the mouse in any place on the screen has the same effect.
Home (Circle): Returns to the main home screen (device desktop).
Overview or Recent or Intent (Square or Split Rect): Display the list of the recently used apps,
in a side-by-side list. To select an app for Split screen, press with the mouse on the app icon and
select “Split screen”; the available screen will split in two and you will see the first app on the left;
then you can select the app for the remaining part of the screen.
Figure 56: Select the Leftmost App for Split Screen – A10
Pressing the split rect icon again, you can change the app selected for the rightmost portion of the
screen or rotate among all the open apps. To stop Split screen, you need to enlarge the portion of
the screen reserved for one of the apps by dragging the separation bar.
Volume Controls(new in Android 10): Show the audio gadget and decrease/increase the audio
level. Android uses separate audio streams for playing music, alarms, notifications, the incoming
call ringer, system sounds, in-call volume, etc.. This allows users to control the volume of each
stream independently. By default, pressing a volume control modifies the volume of the active
audio stream. If your app isn't currently playing anything, hitting the volume keys adjusts the music
volume.
Figure 57: Gadget to Control the Audio Volume
To Next Page
Loading...
