Avaya CU360 - Wireless Display Connections; Connect to Wi-Fi Display (Miracast) from Windows 10 PC

© 2021 Avaya Inc. All rights reserved
Release Notes for Avaya Collaboration Unit CU360 The CU360 Video-collaboration Application 48
- Select Rename device
Please note that if you change the name inside the CU360 App, it will be applied again also to the
Wi-Fi Direct device name.
Warning
• If you launch the Wi-Fi Display app while CU360 App is in a call, and the CU360
device is connected to the network using Wi-Fi, you could experience some video
quality degradation in the call while you wait for the PC or the mobile/tablet to
connect.
• It is suggested to connect the PC or mobile/tablet before placing a call, or use an
Ethernet cable to connect your CU360 Device to the network
Connect to Wi-Fi Display (Miracast) from Windows 10 PC
To connect a Windows PC supporting Wi-Fi Display to your CU360, do the following
- Launch the CU360 Wi-Fi Display app as explained in the “CU360 as Wi-Fi Display”
section.
- On your Windows PC, click on the Notification Icon present on the Tray Bar, and select
“Connect”
- Check if Miracast is supported
- If it is supported, click on your CU360 Name (as a Display)
- Once connected, the Windows PC will see your CU360 device as and additional monitor
(second, third…) at 1080p@30fps, where to extend or duplicate the PC desktop.
- Using the “Project” tab on the PC, you can change PC the desktop projection mode:
o Duplicate, Extend, …
Important
• Controlling the PC with CU’s mouse/keyboard is not supported.
Wi-Fi Display (Miracast) from Android Phone/Tablet
To connect Android Phone/Tablet supporting Wi-Fi Display to your CU360, do the following.
- Activate the Wi-Fi features in your mobile device
o Feature name can change: Smart View, Screen Mirror, Cast, Miracast
Figure 81: Smart View is the name of the feature on some mobile devices (i.e. Samsung)
- Select the CU to connect to, as Mirror Screen or Display
o The phone/tablet will send audio and video to CU
o Sent content will be centered in the Wi-Fi Display app, keeping aspect ratio of the
source device.
o Splitting the CU360 screen or rotating the source (active screen) will recalculate
content placement.
Figure 82: Chose the CU360 device to connect to
Important
• You can control some source Android device with a mouse connected to your CU.
• A keyboard connected with the CU can be used with some Android source devices.
• DRM Protected video content cannot be sent from mobile to CU360.