© 2021 Avaya Inc. All rights reserved
Release Notes for Avaya Collaboration Unit CU360 Known Issues 85
When playing from local USB, it
is not possible to activate screen
link.
Manual Presence Status is
forced to "Busy" when in a SIP
call when using IP Office as
Presence and SIP Server.
Offline presence status in not
correctly displayed by the Avaya
endpoint when using Aura
Presence Server 7.1 (pre-
release)
Select “Aura 7.1” as presence server type.
Avaya One-X
Portal for IP
Office.
It is not possible to subscribe to
accounts used by One-X Portal
clients.
As a workaround you can temporarily assign the
same account to another Codec Unit, subscribe to it
from your Codec Unit, and then move it again to the
client.
Avaya One-X
Portal for IP
Office.
Contacts are not notified of
subscription requests. It is not
possible to grant/revoke
subscription request.
Endpoints must manually
subscribe to other contacts to
view their presence
Cloud Service
Availability
Codec Unit Auto-Provisioning
Service may be interrupted,
including for maintenance,
repairs, upgrades, or equipment
or network failures. We may
discontinue certain features and
the support for certain Codec
Unit devices at any time. Events
beyond our control may affect
our service, such as force
majeure events.
Cloud Service
Availability
When Codec Unit outside
company premises is managed
by Equinox Management, it
cannot join an existing meeting
which requires Path Finder
access (H323 call).
Temporarily disable Equinox Management or place
a SIP call to join the meeting.
To temporarily disable Equinox Management,
change Configure> Advanced>Remote
Access>Equinox Management>Mode to Local; and
Automatic IP address to No; write down the original
local IP address to be restored later, if any, and set
0.0.0.0 as IP address.
Avaya Meetings /
Equinox
/ Scopia Management
If Equinox Management Mode is
set to Local, the endpoint will
not receive roster or calendar
notifications, and could not be
able to present, record to
network or do other actions
even after inserting a valid PIN,
when connected to Equinox
Management 9.0 or higher.
On endpoint, set Configure>Advanced
>Utilities>Remote Access>Equinox
Management>Mode to Cloud.
Assure that Equinox Management 9.x manages
endpoints in cloud mode (Auto-provisioning
enabled).
Equinox Management or Scopia
Management earlier than
9.1.0.365 cannot recognize the
endpoint.
Equinox Management 9.2.1 or
earlier can show XT Series image
in place of the proper image in
the endpoint info page.
Upgrade Equinox management to the latest release.
The CU360 app Floating Bar
doesn't appear on the left of the
split screen with a certain
sequence:
• On the Application main
window, press and hold the
Recent button of the Android
Click anywhere on the CU360 App side of the
screen.
To Next Page
Loading...
