Avaya IX Collaboration Unit CU360 - Avaya IX CU360 Software Upgrades; Enabling Software Upgrades Using the Endpoint

Avaya IX
™
CU360 software packages are signed by the Avaya Certificate Root Authority. You can
update the Avaya IX
™
CU360 software using only Avaya-verified software packages.
Before the software upgrades, Avaya IX
™
CU360 verifies that the software package:
• Is verified by the Avaya Certificate Root Authority.
• Is not tampered.
You can upgrade Avaya IX
™
CU360 using:
• The endpoint
• A computer
• A USB drive
• A web browser
• Avaya Equinox
®
Management
Enabling Avaya IX
™
CU360 software upgrades using the endpoint
About this task
Avaya IX
™
CU360 displays a green icon to notify that a software upgrade is available.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure > Advanced.
• On the web interface, click Administrator Settings.
2. Click Utilities > Remote Access > Download.
3. Configure OTA Update Enabled to Yes.
Upgrading Avaya IX
™
CU360 using the endpoint
About this task
Avaya IX
™
CU360 displays a green icon to notify that a software upgrade is available. Avaya IX
™
CU360 displays the notification only if you enable the option to automatically upgrade the software
from the endpoint.
Do not switch off Avaya IX
™
CU360 till the software upgrade process is complete. If the upgrade
process is interrupted, repeat the upgrade procedure. Do not restart Avaya IX
™
CU360.
During the upgrade process, Avaya IX
™
CU360 displays rotating LEDs on the endpoint.
Maintenance
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 118
Comments on this document? infodev@avaya.com