Name Description
System Name Display Mode The title bar of the Avaya IX
™
CU360 endpoint displays the system name
based on the mode that you select.
The options are:
• Automatic: Automatically displays the name based on deployment.
• System Name Unicode: Displays the name in System Name
Unicode.
• SIP: Displays the SIP username.
• H.323: Displays the H.323 name.
• System Name: Displays the name that you entered in System Name.
Configuring advanced regional audio and video settings in
Avaya IX
™
CU360
About this task
After you set the country and language of Avaya IX
™
CU360 in the quick setup wizard, Avaya IX
™
CU360 defaults to the audio and video standards of that country.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click System > Location.
4. Configure the following fields:
• Country
• Language
• Audio Coding
• Video Frequency
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 60
Comments on this document? infodev@avaya.com
To Next Page
Loading...
