Avaya IX Collaboration Unit CU360 - Configuring Touch-Tone Setting

5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Configuring touch-tone setting in Avaya IX
™
CU360
About this task
You can use the touch-tone feature to display menus and change layouts.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Calls > Preferences > IP.
4. Configure the following fields:
• SIP DTMF
• H.323 DTMF RFC2833
• H.323 DTMF H.245 UII
• Use H.323 Generic Vendor Code
• Dialing Number Format Mode
• Separator
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 72
Comments on this document? infodev@avaya.com