Avaya IX Collaboration Unit CU360 - IP Field Descriptions; Configuring Calls Encryption

IP field descriptions
Name Description
SIP DTMF The option to send DTMF audio tones in the RTP stream for SIP calls.
This is the default option.
H.323 DTMF RFC2833 The option to send DTMF audio tones in the RTP stream for H.323–
based calls.
H.323 DTMF H.245 UII The option to enable or disable the out-of-band DTMF transmissions in
H.323–based calls.
Use H.323 Generic Vendor
Code
The option to enable the H.323 application uses a generic vendor code
identity instead of its default vendor code. So, the remote H.323 devices
do not recognize it as an Avaya endpoint.
Dialing Number Format
Mode
The dial number format of the H.323 or SIP gatekeeper.
You can use any of the following valid formats:
•
<gatekeeper number><separator><extension of the called
endpoint>
•
<extension><separator><number>
Separator The option is used when dialing to the gatekeeper. The default separator
is the pound sign (##).
Configuring the Avaya IX
™
CU360 calls encryption
About this task
You can encrypt SIP-based and H.323-based calls on Avaya IX
™
CU360 for greater security.
Avaya IX
™
CU360 can secure video conference sessions through encrypted connections in point-
to-point calls and video conferences.
• For SIP connections, you can encrypt the media of SIP connections using SRTP.
• For H.323 connections, you can enable the encryption using H.235.
Important:
Using encryption is subject to local regulations. In some countries it is restricted or limited for
usage. For more information, consult your local reseller.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
IP field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 73
Comments on this document? infodev@avaya.com