Avaya IX Collaboration Unit CU360 - Enabling RTP Firewall

The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Calls > Encryption.
4. Select Yes for Enable Encryption.
5. Configure the following fields for securing calls:
• Accept Protected Calls
• Unprotected Calls
• Length of AES key
• Minimum Key Size for DH
• SIP Proprietary Encryption
• Audio Alert
6. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Enabling the RTP firewall in Avaya IX
™
CU360
About this task
Configure Avaya IX
™
CU360 to check the source of the received audio, video, and presentation
(RTP packets) to verify that the source matches the remote endpoint’s IP address.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Calls > Preferences > IP.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 74
Comments on this document? infodev@avaya.com