VENUE System Restore for First Time Setup 22
Creating an E6L Engine System Restore USB Drive
To create an E6L Engine System Restore USB Drive:
1 In the extracted Engine Restore folder, locate the file called
rufus-x.x.x.exe and make sure it is located on the same computer as the
VENUE Engine Restore ISO file.
2 Insert the Engine Restore USB drive into an available USB port on your com-
puter.
3 Double-click the Rufus file to launch it, then in Rufus do the following:
• Choose the USB drive from the
Device pop-up menu.
• Choose
FAT32 from the File System pop-up menu.
• (Optional) Enter a name for the USB drive in the
Volume label field.
4 Under Format options, do the following:
• Choose
Quick Format.
• Choose Create a bootable disk using, and then from the pop-up choose ISO
Image.
• Click the disk icon, browse to the VENUE 7.X.X.xxx S6L_Engine_Re-
store
.iso file, and click Open.
VENUE 7.X.X.xxx S6L_Engine_Restore should appear at the bottom of the
Rufus window.
5 Click Start, then click OK. Rufus begins to format the USB drive and progress
is indicated on-screen.
6 When formatting is completed, remove the USB drive from the computer, and then label the drive “E6L Engine Restore.”
Creating an S6L Control Surface System Restore USB Drive
To create an S6L Control Surface System Restore USB Drive:
7 Insert the S6L Control Surface System Restore USB drive into the USB port of your computer.
8 Relaunch Rufus, if necessary, and do the following in Rufus:
• Choose the USB drive from the
Device pop-up menu.
• Choose
FAT32 from the File System pop-up menu.
• (Optional) Enter a name for the USB drive in the
Volume label field.
9 Under Format options, do the following:
• Choose
Quick Format.
• Choose Create a bootable disk using, and then from the pop-up choose ISO Image.
• Click the disk icon, browse to the VENUE 7.X.X.xxx_S6L_Console_Restore and click Open.
VENUE 7.X.X.xxx_S6L_Console_Restore should appear at the bottom of the Rufus window.
10 Click Start, then click OK. Rufus begins to format the USB drive and progress is indicated on-screen.
11 When formatting is done, click Close, remove the USB drive from the computer, and label the drive “S6L Console Restore.”
12 Proceed to 3. Installing VENUE System Restore Software for the First Time.
If the Autoplay window appears during formatting, close it.
Usi...:VENUE_6.1.0.192_E6L_Engine_Restore.iso
To Next Page
Loading...
Need help?
General
