Azbil C35 Series

6-30
Chapter 6. LIST OF DISPLAYS AND SETTING DATA

Lock bank
Bank selection:
Display Item Contents
Initial
value
User
level
Notes
Key lock 0: All settings are possible.
1: Mode, event, operation display,
SP, UF, lock, and manual MV can
be set.
2: Operation display, SP, UF, lock,
and manual MV can be set.
3: UF, lock, and manual MV can be set.
0 0 When two sets of passwords
(1A and 1B, 2A and 2B) are
matched, the setting is
possible.
[mode] key operation, MV
setting in MANUAL mode, key
lock, password display, and
password 1A to 2B can be set
when the key lock (
LOC
) is a
value of 0 to 3.
Communication lock 0: RS-485 communication read/
write enabled.
1: RS-485 communication read/
write disabled.
0 2
Loader lock 0: Loader communication read/
write enabled.
1: Loader communication read/
write disabled.
0 2
Password display 0 to 15
5: Password 1A to 2B display
0 0
Password 1A 0000 to FFFF (Hexadecimal value) 0000 0 Displayed when the password
display (
PASS
) is “5” and two
sets of passwords (1A and 1B,
2A and 2B) are matched.
Password 2A 0000 to FFFF (Hexadecimal value) 0000 0
Password 1B 0000 to FFFF (Hexadecimal value) 0000 0 Displayed when the password
display (
PASS
) is “5”.
Password 2B 0000 to FFFF (Hexadecimal value) 0000 0

Instrument information bank
Bank selection:
Display Item Contents
Initial
value
User
level
Notes
ROM ID 2 fixed ---- 2 Identification of ROM
firmware setting is disabled.
ROM Version 1 XX.XX (2 digits after decimal point) ---- 2
ROM Version 2 XX.XX (2 digits after decimal point) ---- 2
LOADER Information ---- 2
EST Information ---- 2
Manufacturing date
code (year)
Year - 2000
Example: "3" means the year 2003.
---- 2 Manufacturing date and unit
identification No. setting is
disabled.
Manufacturing date
code (month, day)
Month + Day ÷ 100.
Example: "12.01" means the 1st day
of December.
---- 2
Serial No. ---- 2