Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-9
Key names and functions
This section describes the functions assigned to the dark brown and white keys which
are used to diagnose or check the converter or to control the keyboard, etc.
Key
Description
Press key Press SHIFT + key
: Moves the cursor to the right. No effect
: Moves the cursor to the left. A DE (analog digital):
Switches between analog and
digital communications.
STAT: Displays self-diagnostics
result of the converter.
No effect
SPAN: Displays the span of the
range of a value currently
displayed.
No effect
ALPHA: Press this key before
entering a letter of the alphabet.
When the ““cursor appears on
the display section, it is ready to
enter. Press this key once again to
enter a function or numeral
displayed in the center of each key.
When the display section shows a
cursor, it is ready to enter this
function or numeral.
No effect
SHIFT: Press this key to enter a
function displayed above each key.
When the display section shows
“SHIFT-”, it is ready for input.
No effect
CLR: Clears the display in the
display window and the SFC waits
for input. Or press this key to
answer “No” to a question on the
screen. The screen moves one level
up or down.
When exiting the CONFIG
function, pressing this key jumps
from a lower level to EXIT
CONFIG at a stroke.
CM2-MTG300-2001.book 9 ページ ２０１５年９月２９日 火曜日 午前１０時１４分
To Next Page
Loading...
