Baby Lock Pro-Stitcher BLPS3 - File Management and Library Access

5.4 | Design Menu Pro-Stcher User Manual
To work with design les
Pro-Stcher reads six le types: .hqf, .hqv, .hqp, .qli, .txt, and .tap. Pro-Stcher can also read .hqx encrypted
les, provided you use a key code that is unique to your Pro-Stcher computer. You will need this code
when you purchase the encrypted .hqx designs.
To nd the key code for encrypted les
• Select Sengs, Advanced, About. A pop-up box with the key code then appears on the Pro-Stcher
screen.
Open, close, save, and duplicate design les
To access recently used designs
• Choose Recent to see a list of the most recent designs you have opened. Then select the design you
want to use.
This shortcut enables you to open recent designs without searching through the design library.
To load a design from the design library
1. To load a design, select Design, File, and then select Open.
2. Browse to the design stored either on the C: drive or on a USB drive. The dierent design le types
have color-coded backgrounds as follows:
• *.hqf: beige
• *.hqv: green
• *.hqp: purple
• *.qli: light blue
• *.txt: lavender
• *.tap: pink
Press Recent to show the most
recent designs you’ve opened.
Press Open to see
the library of quilng
designs.
Press Close to close
the selected design.