Balluff BVS HS-P Series - Add-Ons

101
www.balluff.com
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3.8.10 Add-Ons Contact Customer Support for advanced programming of optional and conditional add-ons.
Optional Add-
ons
The reader can be enabled to optionally read the following add-ons (supplementals):
NOTE
If a UPC/EAN base label and an add-on are both decoded, the reader will
transmit the base label and add-on. If a UPC/EAN base label is decoded
without an add-on, the base label will be transmitted without an add-on.
Conditional add-on settings (if enabled) are considered by the reader before
optional add-on settings.
Optional Add-Ons = Disable P2
Optional Add-Ons = Enable P2
Optional Add-Ons = Disable P5
Optional Add-Ons = Enable P5
Optional Add-Ons = Disable GS1-128
Optional Add-Ons = Enable GS1-128
DEFAULT
ADO200(CR
ADO201(CR
DEFAULT
ADO500(CR
ADO501(CR
DEFAULT
ADO800(CR
ADO801(CR