Balluff BVS HS-P Series - Features. Reference Appendix C: Standard Defaults for a Listing of Standard Factory Settings.; Wireless Beeper Features; Good Transmission Beep; Beep Frequency

209
www.balluff.com
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3.11.1 Wireless Beeper
Features
Several options are available to configure beeper behavior for RF operation.
Good
Transmission
Beep
Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs when a
Label is correctly transmitted to the base.
Beep Frequency Adjusts radio-specific beep indications to sound at a low, medium or high frequency, selectable
from the list below (controls the beeper’s pitch/tone).
Good Transmission Beep = Disable
Good Transmission Beep = Enable
$CBT-
$CBT-
DEFAULT
Beep Frequency = Low
Beep Frequency = Medium
Beep Frequency = High
DEFAULT
$CBTBF00(CR
$CBTBF01(CR
$CBTBF02(CR