Balluff BVS HS-P Series - Beep O N Not on File on Page

39
www.balluff.com
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Beep On Not on
File
This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
ACK NAK
Options
This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol.
See page 240 for more information.
Beep On Not On File = Disable
Beep On Not On File = Enable
NF00(CR
DEFAULT
PNF01(CR
ACK/NAK Protocol = Disable ACK/NAK
ACK/NAK Protocol =
Enable for label transmission
ACK/NAK Protocol =
Enable for host-command acknowledge
ACK/NAK Protocol = Enable for label transmis-
sion and host-command acknowledge
DEFAULT
AE00(CR
AE01(CR
AE02(CR
AE03(CR