Balluff BVS HS-P Series User Manual

216
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Erase Batch
Memory
When the reader is configured in Manual Batch Mode, use the following barcode to erase any
labels stored in batch memory.
RF Batch Mode
Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch memory.
NOTE
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this barcode.
BatchClear
Erase Batch Memory
RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 mS
RF Batch Mode Transmit Delay = 100 mS
RF Batch Mode Transmit Delay =
0.5 seconds
RF Batch Mode Transmit Delay = 1 second
RF Batch Mode Transmit Delay =
2.5 seconds
DEFAULT
$CBTTD00(CR
$CBTTD05(CR
$CBTTD0A(CR
$CBTTD32(CR
$CBTTD64(CR
$CBTTDFA(CR

Balluff BVS HS-P Series Specifications

General

Brand	Balluff
Model	BVS HS-P Series
Category	Barcode Reader
Language	English