Balluff BVS HS-P Series User Manual

226
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Bluetooth
Security Mode
This feature enables/disables authentication and encryption of the Bluetooth link. Use the feature
"Bluetooth PIN Code" on page 226 to specify the length and digits in the PIN code used to
authenticate the Bluetooth Link.
Bluetooth PIN
Code
After enabling Security Mode (see "Bluetooth Security Mode" on page 226), specify whether you
want to set a 4-digit or a 16-digit PIN Code. See page 271 for detailed information and examples
for setting this feature.
Select PIN Code
Length
NOTE
Changing the security mode setting will unlink the devices. If the Automatic
Configuration Update is set to the default “Enabled” setting, the devices must
only be relinked. Do not use this setting if AUTOMATIC CONFIGURATION
UPDATE is set to "Disabled"! Please check this setting first before going on.
Bluetooth Security Mode = Disable
Bluetooth Security Mode = Enable
DEFAULT
$CBTSE00(CR
$CBTSE01(CR
Select 4-character Bluetooth PIN Code
Select 16-character Bluetooth PIN Code
CBTPS00\r
DEFAULT
$CBTPS01\r

Balluff BVS HS-P Series Specifications

General

Brand	Balluff
Model	BVS HS-P Series
Category	Barcode Reader
Language	English