Balluff BVS HS-P Series User Manual

161
www.balluff.com
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3.8.33 GS1 DataBar™
Limited
The following options apply to the GS1 DataBar™ Limited (formerly RSS Limited) symbology.
GS1 DataBar™
Limited Enable/
Disable
When disabled, the reader will not read GS1 DataBar™ Limited barcodes.
GS1 DataBar™
Limited GS1-
128 Emulation
When enabled, GS1 DataBar™ Limited barcodes will be translated to the GS1-128 label data for-
mat.
GS1 DataBar™
Limited 2D
Component
This feature enables/disables a requirement that a 2D label component be decoded when a base
label of this symbology is decoded.
GS1 DataBar™ Limited = Disable
GS1 DataBar™ Limited = Enable
DEFAULT
LBEN00(CR
LBEN01(CR
GS1 DataBar™ Limited GS1-128 Emulation =
Disable
GS1 DataBar™ Limited GS1-128 Emulation =
Enable
DEFAULT
LBU800(CR
LBU801(CR
GS1 DataBar™ Limited 2D Component =
Disable (2D component not required)
GS1 DataBar™ Limited 2D Component =
2D component must be decoded
DEFAULT
LB2D00(CR
LB2D01(CR

Balluff BVS HS-P Series Specifications

General

Brand	Balluff
Model	BVS HS-P Series
Category	Barcode Reader
Language	English