Balluff BVS HS-P Series User Manual

156
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3.8.31 GS1 DataBar™
Omnidirectional
The following options apply to the GS1 DataBar™ Omnidirectional (formerly RSS-14) symbology.
GS1 DataBar™
Omnidirectional
Enable/Disable
When disabled, the reader will not read GS1 DataBar™ Omnidirectional barcodes.
GS1 DataBar™
Omnidirectional
GS1-128
Emulation
When enabled, GS1 DataBar™ Omnidirectional barcodes will be translated to the GS1-128 label
data format.
GS1 DataBar™
Omnidirectional
2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a base
label for this symbology is decoded.
GS1 DataBar™ Omnidirectional = Disable
GS1 DataBar™ Omnidirectional = Enable
DEFAULT
4BEN00(CR
4BEN01(CR
GS1 DataBar™ Omnidirectional GS1-128
Emulation = Disable
GS1 DataBar™ Omnidirectional GS1-128
Emulation = Enable
DEFAULT
4BU800(CR
4BU801(CR
GS1 DataBar™ Omnidirectional 2D Compo-
nent = Disable (2D component not required)
GS1 DataBar™ Omnidirectional 2D Compo-
nent = 2D component must be decoded
DEFAULT
4B2D00(CR
4B2D01(CR

Balluff BVS HS-P Series Specifications

General

Brand	Balluff
Model	BVS HS-P Series
Category	Barcode Reader
Language	English