Balluff BVS HS-P Series - CONFIGURATION UPDATES Starting; Automatic Configuration Update; Copy Configuration to Reader; Copy Configuration to Base Station

214
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3.11.2 Configuration
Updates
See page 270 in “References” for detailed information and examples of these features.
Automatic
Configuration
Update
When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration. See
page 270 for more
information on this feature.
Copy
Configuration to
reader
Scan the following label to copy the current Base Station configuration to the reader. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time config
-
uration update to be performed on the reader.
Copy
Configuration to
Base Station
Scan the following label to copy the current reader configuration to the Base Station. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time config-
uration update to be performed on the Base Station.
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
$CBT-
$CBT-
DEFAULT
NOTE
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
CpyCfg2HH
Copy Configuration to Reader
NOTE
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
Copy Configuration to Base Station
Cpycfg2Ba
$CCpyCfg2HH