Barco CLM W6 Service Manual

Chapter 2 Disassembly Process
2-41
CLM W6_CLM HD6 Jan 31, 2012
18. Unscrew 2 screws (red circle) to
disassemble two lens shift sensor
cables.
19. Unscrew 3 screws (yellow circle) to
disassemble DC motor-1 board.
Unplug 1 motor cable from DC motor-1
board.
20. Unscrew 2 screws (yellow circle).
Remove Rod,Rod base spring,
Rod holder spring sequentially.
Rod
ROD base spring
ROD holder spring

Barco CLM W6 Specifications

General

Brand	Barco
Model	CLM W6
Category	Projector
Language	English