7. ICMP
Image 7-20
5. Switch on the projector.
In case y ou replace one HDD (e.g. degraded mode) the ICMP automatically starts with the RAID recovery
process. The red LED o f the HDD which has to b e rebuilt is blinking. This process takes ab out 200 GB per
hour. Once the RA ID is completed the red LED turns off.
CAUTION: It’s strongly recommended to com plete the RAID recovery process prior to starting a show. This
to ensure that the content integrity is preserved and that the show is n ot interrupted.
R5906847 DP2K SLP SERIES 02/06/2017 81
To Next Page
Loading...
Need help?
General
