Barco PDS - Page 134

120 PDS • User’s Guide
_K==oÉãçíÉ=`çåíêçä
PDS Command List
ICSP Input Colorspace Adjust 130
IHATV Input Horizontal Active Adjust 130
IHCROP Input Horizontal Crop 130
IHPAN Input Horizontal Pan 131
IHPOS Input Horizontal Position Adjust 131
IHTOTAL Input Horizontal Total Adjust 131
IHUE Input Hue Adjust 131
IMAP Maps the input file configuration for the selected input 132
IRBRT Input RGB Brightness Adjust 132
IRCNT Input RGB Contrast Adjust 132
IRES Input Resolution Select 132
ISAT Input Saturation Adjust 133
ISEL Selects the selected input as the current input to display 133
ISIZERST Reset the input sizing parameters to default values 134
ISLICE Input Sync Slice Threshold Adjust 134
ISMP Adjust Input Sample mode 134
ISYNC Input Sync Type Adjust 134
ITYPE Input Type Adjust 135
IVATV Input Vertical Active Adjust 135
IVCROP Input Vertical Crop 136
IVPAN Input Vertical Pan 136
IVPOS Input Vertical Position Adjust 136
IVTOTAL Input Vertical Total Adjust. Query-only command. 136
PCOMP Pulldown Compensation mode adjust 136
TAKE Take the input currently on preview onto program 137
Output Commands
BLACK
Set the mixer output to black 138
OAVAIL Checks availability of the preview output. Query-only command. 138
OCSAV Save Output Configuration 138
OGM Set Output Gamma 138
ORBM Output Raster Box Mode 138
ORES Output Resolution 139
OSRC Select the input source for the preview output 139
Table B-3. PDS Remote Commands (Continued)
Command Description Page