PDS • User’s Guide 31
4. Operation
Quick Function Reference
Set Auto Input Cfg mode Auto Input Cfg 60
Set Auto Input Save mode Auto Input Save
60
Set Auto Take mode Auto Take
61
Set Black Auto Take mode Black Auto Take
61
Set color input space Colorspace
38
Set DVI cable equalization DVI Cable Equal
68
Set Ethernet parameters Ethernet
64
Set Auto Acquire mode Auto Acquire
59
Set input format Input Format
37
Set input type Type
38
Set Menu Context mode Menu Context
62
Set or change multiple input configurations F
ile Association 70
Set or change a single input configuration Recall Config
48
Set output format Output Format
50
Set Preview or Program mode Adjust On
38
Set Serial port parameters Serial Setup
66
Set up EDID Input EDID
67
Set up Logo Logo Menu
57
Set up sync Sync Settings
52
Set user preferences User Preference Menu
58
Set VFD brightness VFD Brightness
63
Understand auto acquire Using Auto Acquire
77
Use Black Using Black
81
Use Freeze Using Freeze
81
Use HDCP Using HDCP
77
Use inputs Using Inputs
75
Use the Input Menu Input Menu
36
Use the Logo Using the Logo
78
Use the Logo Menu Logo Menu
57
Use the menu system U
sing the Menu System 28
Use the Output Menu Output Menu
50
Use the Preview Menu Preview Menu (PDS 902 Only)
53
Use the Setup Menu Setup Menu
35
Table 4-1. PDS Quick Function Reference Table (Continued)
How to: Use the Following Section: Page
To Next Page
Loading...
